Home › Furnace filters › DM92SE
Daikin DM92SE filter sizes: 16 x 25 and 20 x 25, as listed in the Daikin source document's filter table. Which size fits depends on your cabinet and return. This page is pending human review, so check the source excerpt below.
Auto-extracted · review pending Filter sizes auto-extracted from the manufacturer document.
Last checked against the manufacturer document:
| Sizes found in the source table |
|---|
| 16 x 25 |
| 20 x 25 |
Extracted by script from the linked document. Read the excerpt to see which size applies to which cabinet or return.

General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.
Pull the old filter and read the size printed on its frame. Nominal sizes are rounded up: a 15.5 x 24.5 in. filter is sold as 16 x 25.
Your furnace manual lists the filter's dimensions, not its MERV rating. Higher-MERV filters restrict more air. Manufacturers such as Carrier recommend keeping the clean-filter pressure drop under 0.2 in. w.c. (ideally under 0.1). Lennox warns that an over-restrictive filter can trip the high limit in winter and freeze the coil in summer. If you want MERV 11–13, a 4-in. media cabinet is the usual route. Ask an HVAC tech to check static pressure. Nominal sizes are rounded: a filter labeled 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75.
Manufacturer document for Daikin DM92SE
Last checked 2026-10-29. Manufacturers revise documents. If your unit's label disagrees, trust the label.
Minimum Filter Sizes
DM92SE DM92SE DM92SE DM92SE DM92SE DM92SE DM92SE DM92SE
0403BN 0603BN 0803BN 0804CN 0805CN 1004CN 1005CN 1205DN
(1) 16 x 25 (1) 20 x 25 (bottom) (1) 16 x 25 (1) 20 x 25 (bottom)
Filter Size (in²) (Qty) (side or bottom) or (2) 16 x 25 (side) (side or bottom) or (2) 16 x 25 (side)
Note: Other size filters of equal or greater dimensions may be used. Filters may also be centrally located.
SS-DM92SE www.daikincomfort.com 5
DM92SE Airflow Data
CIRCULATION AIRFLOW DATA
DIP External Static Pressure, (Inches Water Column)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Model SWITCHES
S2-3 , S2-4 CFM CFM CFM CFM CFM CFM CFM CFM CFM CFM
OFF OFF 628 582 530 478 428 370 319 282 239 201
DM92SE ON OFF* 806 762 719 676 633 594 551 506 463 418
0403AN ON ON** 1111 1071 1033 1002 971 936 905 871 839 807
OFF ON** 1359 1322 1290 1258 1229 1203 1176 1148 1122 1095Daikin DM92SE filter sizes: 16 x 25 and 20 x 25, as listed in the Daikin source document's filter table. Which size fits depends on your cabinet and return. This page is pending human review, so check the source excerpt below. 16 x 25; 20 x 25.
General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.
Filter sizes are nominal (rounded). A filter sold as 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75 in. Buy by the nominal size printed on the frame.
Yes. The source table lists 2 sizes: 16 x 25 and 20 x 25. Which one applies depends on your cabinet and return; check the excerpt (pending human review).
Manufacturer document for Daikin DM92SE (https://cdn.daikincloud.io/PIM/Assets/Documents/SS-DM92SE.pdf), last checked 2026-10-29.