Home › Furnace filters › DM92SS / DC92SS
Daikin DM92SS / DC92SS filter sizes: 16 x 25 and 20 x 25, as listed in the Daikin source document's filter table. Which size fits depends on your cabinet and return. This page is pending human review, so check the source excerpt below.
Auto-extracted · review pending Filter sizes auto-extracted from the manufacturer document.
Last checked against the manufacturer document:
| Sizes found in the source table |
|---|
| 16 x 25 |
| 20 x 25 |
Extracted by script from the linked document. Read the excerpt to see which size applies to which cabinet or return.
General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.
Pull the old filter and read the size printed on its frame. Nominal sizes are rounded up: a 15.5 x 24.5 in. filter is sold as 16 x 25.
Match the size or part number printed on your current filter.
As an Amazon Associate I earn from qualifying purchases.
Your furnace manual lists the filter's dimensions, not its MERV rating. Higher-MERV filters restrict more air. Manufacturers such as Carrier recommend keeping the clean-filter pressure drop under 0.2 in. w.c. (ideally under 0.1). Lennox warns that an over-restrictive filter can trip the high limit in winter and freeze the coil in summer. If you want MERV 11–13, a 4-in. media cabinet is the usual route. Ask an HVAC tech to check static pressure. Nominal sizes are rounded: a filter labeled 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75.
Manufacturer document for Daikin DM92SS / DC92SS
Last checked 2026-10-28. Manufacturers revise documents. If your unit's label disagrees, trust the label.
Minimum Filter Sizes
DM92SS DM92SS DM92SS DM92SS DM92SS DM92SS DM92SS DM92SS
0402BNA 0603BNA 0803BNA 0804CNA 0805CNA 1004CNA 1005CNA 1205DNA
(1) 16 x 25 (1) 20 x 25 (bottom) (1) 16 x 25 (1) 20 x 25 (bottom)
Filter Size (in²) (Qty) (side or bottom) or (2) 16 x 25 (side) (side or bottom) or (2) 16 x 25 (side)
Note: Other size filters of equal or greater dimensions may be used. Filters may also be centrally located.
SS-DM92SS www.daikincomfort.com 7
DC92SS Airflow Data
(CFM & Temperature Rise vs. External Static Pressure)
External Static Pressure, (Inches Water Column)
Motor Tons
Model 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Speed AC¹
CFM Rise CFM Rise CFM Rise CFM Rise CFM Rise CFM CFM CFM
High 3 1,400 N/A 1,331 N/A 1,263 N/A 1,189 N/A 1,106 31 1,020 941 843
DC92SS Med 2.5 1,204 N/A 1,176 N/A 1,121 30 1,072 32 1,002 34 927 853 740
0402BNA Med-Lo 2 1,020 33 998 34 968 35 923 37 880 39 820 739 652
Low 1.5 841 41 827 41 797 43 766 44 727 47 680 634 556Daikin DM92SS / DC92SS filter sizes: 16 x 25 and 20 x 25, as listed in the Daikin source document's filter table. Which size fits depends on your cabinet and return. This page is pending human review, so check the source excerpt below. 16 x 25; 20 x 25.
General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.
Filter sizes are nominal (rounded). A filter sold as 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75 in. Buy by the nominal size printed on the frame.
Yes. The source table lists 2 sizes: 16 x 25 and 20 x 25. Which one applies depends on your cabinet and return; check the excerpt (pending human review).
Manufacturer document for Daikin DM92SS / DC92SS (https://cdn.daikincloud.io/PIM/Assets/Documents/SS-DM92SS.pdf), last checked 2026-10-28.