Home › Furnace filters › 59SP6B

Carrier 59SP6B furnace: filter size

Carrier 59SP6B filter sizes: 14 x 25 x 3/4, 16 x 25 x 3/4, 16 x 25 x 4-5/16, 20 x 25 x 3/4, 20 x 25 x 4-5/16, 24 x 25 x 3/4 and 24 x 25 x 4-5/16, as listed in the Carrier source document's filter table. Which size fits depends on your cabinet and return. This page is pending human review, so check the source excerpt below.

Auto-extracted · review pending Filter sizes auto-extracted from the manufacturer document.

Last checked against the manufacturer document:

Filter sizes by cabinet / model

Sizes found in the source table
14 x 25 x 3/4
16 x 25 x 3/4
16 x 25 x 4-5/16
20 x 25 x 3/4
20 x 25 x 4-5/16
24 x 25 x 3/4
24 x 25 x 4-5/16

Extracted by script from the linked document. Read the excerpt to see which size applies to which cabinet or return.

Close-up of a pleated furnace air filter
Illustration only. Not this manufacturer's part.

Replacement interval

General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.

Before you buy

Pull the old filter and read the size printed on its frame. Nominal sizes are rounded up: a 15.5 x 24.5 in. filter is sold as 16 x 25.

MERV notes

Your furnace manual lists the filter's dimensions, not its MERV rating. Higher-MERV filters restrict more air. Manufacturers such as Carrier recommend keeping the clean-filter pressure drop under 0.2 in. w.c. (ideally under 0.1). Lennox warns that an over-restrictive filter can trip the high limit in winter and freeze the coil in summer. If you want MERV 11–13, a 4-in. media cabinet is the usual route. Ask an HVAC tech to check static pressure. Nominal sizes are rounded: a filter labeled 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75.

Related models

Where this data came from

Manufacturer document for Carrier 59SP6B
Last checked 2026-11-05. Manufacturers revise documents. If your unit's label disagrees, trust the label.

Excerpt from the source

     *. Recommended to maintain air filter face velocity. See Product Data for part number
       Table 9 – Air Filter Selection and Duct Sizing - In. (mm)                                                    Table 10 – Air Filter Located in Filter Cabinet
    FURNACE                            FILTER SIZE                                                         FILTER
     CASING                                                                                               CABINET                                                                         FILTER
                                                       BOTTOM            FILTER TYPE†                                                    FILTER SIZE - IN (MM)*
     WIDTH*              SIDE RETURN
                                                       RETURN
                                                                                                         HEIGHT - IN                                                                      TYPE†
                                                                                                            (MM)
                          16 x 25 x 3/4           14 x 25 x 3/4
  14-3/16 (360)                                                             Washable                                                (1) 16 x 25 x 3/4 (406 x 635 x 19) or               Washable or
                        (406 x 635 x 19)        (356 x 635 x 19)                                           16 (406)
                                                                                                                                   (1) 16 x 25 x 4-5/16 (406 x 635 x 110)                 Media
                          16 x 25 x 3/4           16 x 25 x 3/4
   17-1/2 (445)                                                             Washable                                                (1) 20 x 25 x 3/4* (508 x 635 x 19) or              Washable or
                        (406 x 635 x 19)        (406 x 635 x 19)                                           20 (508)
                                                                                                                                   (1) 20 x 25 x 4-5/16 (508 x 635 x 110)                 Media*
                          16 x 25 x 3/4           20 x 25 x 3/4
     21 (533)                                                               Washable                                                (1) 24 x 25 x 3/4* (610 x 635 x 19) or   

FAQ

What size filter does the Carrier 59SP6B use?

Carrier 59SP6B filter sizes: 14 x 25 x 3/4, 16 x 25 x 3/4, 16 x 25 x 4-5/16, 20 x 25 x 3/4, 20 x 25 x 4-5/16, 24 x 25 x 3/4 and 24 x 25 x 4-5/16, as listed in the Carrier source document's filter table. Which size fits depends on your cabinet and return. This page is pending human review, so check the source excerpt below. 14 x 25 x 3/4; 16 x 25 x 3/4; 16 x 25 x 4-5/16; 20 x 25 x 3/4; 20 x 25 x 4-5/16; 24 x 25 x 3/4; 24 x 25 x 4-5/16.

How often should I replace the Carrier 59SP6B filter?

General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.

Why doesn't my filter measure exactly 16 x 25?

Filter sizes are nominal (rounded). A filter sold as 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75 in. Buy by the nominal size printed on the frame.

How thick is the Carrier 59SP6B filter?

Sizes found in the source table, by thickness: 3/4 in.: 14 x 25 x 3/4, 16 x 25 x 3/4, 20 x 25 x 3/4, 24 x 25 x 3/4; 4-5/16 in.: 16 x 25 x 4-5/16, 20 x 25 x 4-5/16, 24 x 25 x 4-5/16. Pending human review; check the excerpt.

Where does this information come from?

Manufacturer document for Carrier 59SP6B (https://www.shareddocs.com/hvac/docs/1009/Public/0D/59SP6B-03SI.pdf), last checked 2026-11-05.