Home › Furnace filters › 926TB

Bryant 926TB furnace: filter size

Our script found these filter sizes in the Bryant 926TB source document's filter table: 14x25x3/4, 16x25x3/4, 20x25x3/4, 24x25x3/4. This page is pending human review, so check the source excerpt on the page to see which size applies to your cabinet and return.

Auto-extracted · review pending Filter sizes auto-extracted from the manufacturer document.

Filter sizes by cabinet / model

Sizes / part numbers found in the source table
14 x 25 x 3/4
16 x 25 x 3/4
20 x 25 x 3/4
24 x 25 x 3/4

Extracted by script from the linked document. Read the excerpt to see which size applies to which cabinet or return.

Close-up of a pleated furnace air filter
Illustration only. Not this manufacturer's part.

Replacement interval

General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.

Before you buy

Pull the old filter and read the size printed on its frame. Nominal sizes are rounded up: a 15.5 x 24.5 in. filter is sold as 16 x 25.

Buy

Match the size or part number printed on your current filter.

MERV notes

Your furnace manual lists the filter's dimensions, not its MERV rating. Higher-MERV filters restrict more air. Manufacturers such as Carrier recommend keeping the clean-filter pressure drop under 0.2 in. w.c. (ideally under 0.1). Lennox warns that an over-restrictive filter can trip the high limit in winter and freeze the coil in summer. If you want MERV 11–13, a 4-in. media cabinet is the usual route. Ask an HVAC tech to check static pressure. Nominal sizes are rounded: a filter labeled 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75.

Where this data came from

Manufacturer document for Bryant 926TB
Last checked 2026-10-23. Manufacturers revise documents. If your unit's label disagrees, trust the label.

Excerpt from the source

filter for assembly and other details.                                                                                                                         24-1/2-in. Furnace
                                                                                                                                                               up to 4-Ton AC
See Table 6 for filter size details.                                                              20- or 24-in. Media
                                                                                                       Cabinet
                                                                                                                                                               Capacity
        Table 6 – Air Filter Selection and Duct Sizing - In. (mm)                                                                                                                          45°
    FURNACE                      FILTER SIZE
     CASING                 SIDE           BOTTOM                   FILTER TYPE*                   Bottom Return Plenum
     WIDTH               RETURN            RETURN                                                                                                                      Transition
                        16 x 25 x 3/4    14 x 25 x 3/4
  14-3/16 (360)                                                        Washable                                                                                  20- or 24-in. Media Cabinet
                      (406 x 635 x 19) (356 x 635 x 19)                                     20- or -24-in. Media Cabinet Installation
                                                                                           for Combination Side and Bottom Return                         20- or -24-in. Media Cabinet Installation
                        16 x 25 x 3/4    16 x 25 x 3/4                                                                                                             with Angled Transition
   17-1/2 (445)                                                        Washable
                      (406 x 635 x 19) (406 x 635 x 19)
                        16 x 25 x 3/4    20 x 25 x 3/4
     21 (533)                                                          Washable
                      (406 x 635 x 19) (508 x 635 x 19)
                        16 x 25 x 3/4    24 x 25 x 3/4                                                   14-3/16-in. Furnace
   24

FAQ

What size filter does the Bryant 926TB use?

Our script found these filter sizes in the Bryant 926TB source document's filter table: 14x25x3/4, 16x25x3/4, 20x25x3/4, 24x25x3/4. This page is pending human review, so check the source excerpt on the page to see which size applies to your cabinet and return. 14 x 25 x 3/4; 16 x 25 x 3/4; 20 x 25 x 3/4; 24 x 25 x 3/4.

How often should I replace the Bryant 926TB filter?

General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.

Why doesn't my filter measure exactly 16 x 25?

Filter sizes are nominal (rounded). A filter sold as 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75 in. Buy by the nominal size printed on the frame.

Where does this information come from?

Manufacturer document for Bryant 926TB (https://www.shareddocs.com/hvac/docs/1009/Public/06/II926TB-04.pdf), last checked 2026-10-23.