Home › Furnace filters › AMEC96

Amana AMEC96 furnace: filter size

The Amana AMEC96 furnace uses a 14 x 25, 16 x 25 or 20 x 25 filter, depending on cabinet width (or model) and return location (per the Amana document cited on this page). The table below shows which size applies to each cabinet and return.

Verified from manufacturer doc Filter sizes hand-checked against the manufacturer document

Last checked against the manufacturer document:

Applies to

Model numbers printed in the linked Amana document:

AMEC960303ANA, AMEC960403ANA, AMEC960603ANA, AMEC960302BNA, AMEC960402BNA, AMEC960603BNB, AMEC960803BNA, AMEC961004CNA, AMEC961205DNA

Filter sizes by cabinet / model

ModelMinimum filter size(s)
AMEC960303ANA / 0403ANA / 0603ANA16 x 25 (side) or 14 x 25 (bottom)
AMEC960302BNA / 0402BNA / 0603BNB / 0803BNA / 1004CNA(1) 16 x 25 (side or bottom)
AMEC961205DNA(1) 20 x 25 (bottom) or (2) 16 x 25 (side)

Other sizes of equal or greater dimensions may be used; filters may also be centrally located (per the sheet).

Close-up of a pleated furnace air filter
Illustration only. Not this manufacturer's part.

Replacement interval

General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.

Before you buy

Pull the old filter and read the size printed on its frame. Nominal sizes are rounded up: a 15.5 x 24.5 in. filter is sold as 16 x 25.

Buy

Match the size or part number printed on your current filter.

Find on Amazon

As an Amazon Associate I earn from qualifying purchases.

MERV notes

Your furnace manual lists the filter's dimensions, not its MERV rating. Higher-MERV filters restrict more air. Manufacturers such as Carrier recommend keeping the clean-filter pressure drop under 0.2 in. w.c. (ideally under 0.1). Lennox warns that an over-restrictive filter can trip the high limit in winter and freeze the coil in summer. If you want MERV 11–13, a 4-in. media cabinet is the usual route. Ask an HVAC tech to check static pressure. Nominal sizes are rounded: a filter labeled 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75.

Related models

Where this data came from

SS-AMEC96 specification sheet, Minimum Filter Sizes
Last checked 2026-10-26. Manufacturers revise documents. If your unit's label disagrees, trust the label.

FAQ

What size filter does the Amana AMEC96 furnace use?

The Amana AMEC96 furnace uses a 14 x 25, 16 x 25 or 20 x 25 filter, depending on cabinet width (or model) and return location (per the Amana document cited on this page). The table below shows which size applies to each cabinet and return. AMEC960303ANA / 0403ANA / 0603ANA – 16 x 25 (side) or 14 x 25 (bottom); AMEC960302BNA / 0402BNA / 0603BNB / 0803BNA / 1004CNA – (1) 16 x 25 (side or bottom); AMEC961205DNA – (1) 20 x 25 (bottom) or (2) 16 x 25 (side).

How often should I replace the Amana AMEC96 furnace filter?

General guidance (not from this manual): check monthly and replace 1-in. filters every 1–3 months, or follow the filter maker's guidance and your owner's manual.

Why doesn't my filter measure exactly 16 x 25?

Filter sizes are nominal (rounded). A filter sold as 16 x 25 x 1 actually measures about 15.5 x 24.5 x 0.75 in. Buy by the nominal size printed on the frame.

What filter size does the Amana AMEC960303ANA / 0403ANA / 0603ANA use?

16 x 25 (side) or 14 x 25 (bottom) (per the Amana source table).

What filter size does the Amana AMEC961205DNA use?

(1) 20 x 25 (bottom) or (2) 16 x 25 (side) (per the Amana source table).

Where does this information come from?

SS-AMEC96 specification sheet, Minimum Filter Sizes (https://apps.goodmanmfg.com/brochures/files/5ba384689757eSS-AMEC96.pdf), last checked 2026-10-26.